Following the successful development of our original Hoof Lifter, our R&D department have produced the Mk2 version. This unit is evensimpler, without the frame required on the original. The Mk2 simplylocks onto the pipe rail of a control race or crush with the ropelooping over an upper rail. The rope is pulled down and attached to thecow´s ankle, and the leg, front or back, winched up to the requiredheight. Ideally the leg is then secured to the appropriate rail using aVet-rope. NB: As with any lifting device care must be taken to releasethe leg quickly if the cow goes down.